Machine Specification: Alpha 1330U HS
| METRIC | IMPERIAL | |
| CAPACITY | ||
| Swing over bed | 360mm | 14 1/5" |
| Swing over cross slide | 206mm | 8 1/8" |
| Swing in gap | 585mm | 23" |
| Gap width from faceplate | 160mm | 6 3/10" |
| Distance between centres | 760mm | 30" |
| SPINDLE | ||
| Spindle centre height | 1032mm | 40 5/8" |
| Spindle nose | A2-5 | A2-5 |
| Spindle bore | 54mm | 2 1/8" |
| Maximum spindle speed | 5000 rpm | 5000 rpm |
| Spindle speed ranges | ||
| Low | 270 - 5000 rpm | 270 - 5000 rpm |
| Maximum spindle motor power | 7.5kW | 10 HP |
| TAILSTOCK | ||
| Tailstock quill diameter | 75mm | 3" |
| Tailstock quill taper | No 4 MT | No 4 MT |
| Tailstock quill travel | 120mm | 4 3/4" |
| BED | ||
| Cross (X) axis ball screw diameter | 20mm | 3/4" |
| Longitudinal (Z) axis ball screw diameter | 32mm | 1 1/4" |
| Cross slide thrust - X axis | 5.03kN | 5.03kN |
| Saddle thrust - Z axis | 5kN | 5kN |
| Longitudinal / Cross feedrates - Metric | 0.3 - 0.6mm/rev | |
| Rapid traverse rate - X axis | 3m/min | 118ipm |
| Rapid traverse rate - Z axis | 6m/min | 236ipm |
| Rapid traverse rate - X axis (Guards open) | 2m/min | 79ipm |
| Rapid traverse rate - Z axis (Guards open) | 2m/min | 79ipm |
| Bed inclination | 30° | 30° |
| SPACE AND WEIGHT | ||
| Maximum power consumption | 23.5kVA | 23.5kVA |
| Overall machine length | 2.35m | 92 1/2" |
| Overall machine width | 1.68m | 66.1" |
| Overall machine height | 1.45m | 57.1" |
| Overall machine weight | 2700kg | 5952lbs |
|
NB: Illustrations and specifications are not binding in detail and are subject to modification and improvement without notice. |
||
