Machine Specification: Alpha 1400U
| METRIC | IMPERIAL | |
| CAPACITY | ||
| Swing over bed | 400mm | 15 3/4" |
| Swing over cross slide | 245mm | 9 5/8" |
| Swing in gap | 585mm | 23" |
| Gap width from faceplate | 165mm | 6 1/2" |
| Distance between centres | 1250mm | 49.2" |
| SPINDLE | ||
| Spindle centre height | 1086mm | 42.7" |
| Spindle nose | D1 - 6 Camlock | D1 - 6 Camlock |
| Taper in spindle nose bush | No 4 MT | No 4 MT |
| Spindle bore | 55mm | 2.2" |
| Maximum spindle speed | 2500 rpm | 2500 rpm |
| Spindle speed ranges | ||
| Low | 6.25 - 625 rpm | 6.25 - 625 rpm |
| High | 25 - 2500 rpm | 25 - 2500 rpm |
| Maximum spindle motor power | 7.5kW | 10HP |
| TAILSTOCK | ||
| Tailstock quill diameter | 73mm | 2 7/8" |
| Tailstock quill taper | No 5 MT | No 5 MT |
| Tailstock quill travel | 140mm | 5 1/2" |
| BED | ||
| Cross (X) axis ball screw diameter | 20mm | 0.8" |
| Longitudinal (Z) axis ball screw diameter | 32mm | 1 1/4" |
| Cross slide thrust - X axis | 5.03kN | 5.03kN |
| Saddle thrust - Z axis | 6kN | 6kN |
| Longitudinal / Cross feedrates - Metric | 0.3 - 0.6mm/rev | 0.3 - 0.6mm/rev |
| Rapid traverse rate - X axis | 3m/min | 118ipm |
| Rapid traverse rate - Z axis | 6m/min | 236ipm |
| Rapid traverse rate - X axis (Guards open) | 2m/min | 79ipm |
| Rapid traverse rate - Z axis (Guards open) | 2m/min | 79ipm |
| Bed inclination | 30° | 30° |
| SPACE AND WEIGHT | ||
| Maximum power consumption | 23.5kVA | 23.5kVA |
| Overall machine length | 3.2m | 126" |
| Overall machine width | 1.72m | 67.7" |
| Overall machine height | 1.5m | 59.1" |
| Overall machine weight | 3100kg | 6835lbs |
|
NB: Illustrations and specifications are not binding in detail and are subject to modification and improvement without notice. |
||
